Table of Contents
Advertisement
Enable Unicast
14. Define the following
NetBIOS
NetBIOS Node Type
NetBIOS Servers
15. Refer to the
Static Routes Installed on Clients
of static IP addresses without creating numerous host pools with manual bindings. This eliminates the need for a long
configuration file and reduces the space required in NVRAM to maintain address pools. Select the
add individual destinations. Select the
16. Scroll down to the
DHCP Option Values
clients, whereas a set of subnet options applies only to the clients on a specified subnet. If you configure the same option
in more than one set of options, the precedence of the option type decides which the DHCP server supports a client.
17. Select the
+ Add Row
button to add individual options. Assign each a
it from others with similar configurations. At any time you can select the radio button of an existing option and select the
- Delete
button to remove it from the list of those available.
18. Assign a
Value
to each option with codes in the range of 1 through 254. A vendor specific option definition only applies to
the vendor class for which it is defined.
19. Within the
Network
field, define one or group of
addresses can be provided and translated.
Within the
Network
field, define one or more
addresses can be provided for Default Routers.
20. Select
OK
when completed to update the static bindings configuration. Select
configuration.
21. Select the
Advanced
tab to define additional NetBIOS and Dynamic DNS parameters.
Unicast packets are sent from one location to another location (there's just one sender,
and one receiver). Select this option to forward unicast messages to just a single device
within this network pool.
parameters required to complete the creation of the static binding configuration:
Set the NetBIOS Node Type used with this particular pool. The node can have one of the
following types:
• Broadcast - Uses broadcasting to query nodes on the network for the owner of a
NetBIOS name.
• Peer-to-Peer - Uses directed calls to communicate with a known NetBIOS name server
(such as a WINS server), for the IP address of a NetBIOS machine.
• Mixed - A mixed node using broadcast queries to find a node, and failing that, queries
a known p-node name server for the address.
• Hybrid - A combination of two or more nodes.
• Undefined - No node type is applied.
Specify a numerical IP address of a single or group of NetBIOS WINS servers available to
DHCP supported wireless clients. A maximum of 8 server IP addresses can be assigned.
field to set
Delete
icon to remove it from the list of those available.
table to set Global DHCP options. A set of global DHCP options applies to all
DNS Servers
Default Routers
Destination
IP and
Gateway
Global DHCP Option Name
to translate domain names to IP addresses. Up to 8 IP
to resolve routes to other parts of the network. Up to 8 IP
Reset
to revert to the last saved
9 - 21
addresses enabling assignment
+ Add Row
button to
to help differentiate
Hide quick links:
Advertisement
Table of Contents
