Motorola WiNG 5.4.2 System Reference Manual page 251

Use DHCP to Obtain IP
Use DHCP to obtain
Gateway/DNS Servers
Secondary Addresses
13. Define or override the Network Address Translation
14. Select either the Inside,
• Inside - The inside network is transmitting data over the network its intended destination. On the way out, the source IP
address is changed in the header and replaced by the (public) IP address.
• Outside - Packets passing through the NAT on the way back to the LAN are searched against to the records kept by the
NAT engine. There the destination IP address is changed back to the specific private class IP address in order to reach
the LAN over the switch managed network.
• None - No NAT activity takes place. This is the default setting.
NOTE: Refer to
creating a profile's NAT configuration.
15. Select OK button to save the changes and overrides to the Basic Configuration screen. Select
saved configuration.
16. Select the Security tab.
The firewall inspects and packet traffic to and from connected clients.
If a firewall rule does not exist suiting the data protection needs of this Virtual Interface, select the
a new firewall rule configuration or the Edit icon to modify or override an existing configuration. For more information, see
Wireless Firewall on page
Select this option to allow DHCP to provide the IP address for the Virtual Interface.
Selecting this option disables the Primary IP address field. AP6522, AP6532, AP6562,
AP8132, AP7131 and AP7161 have on onboard DHCP server resources, while AP6511 and
AP6521 models do not.
Select this option to allow DHCP to obtain a default gateway address, and DNS resource
for one virtual interface. This setting is disabled by default and only available when the
Use DHCP to Obtain IP option is selected. AP6522, AP6532, AP6562, AP8132, AP7131 and
AP7161 have on onboard DHCP server resources, while AP6511 and AP6521 models do
not.
Use the Secondary Addresses parameter to define additional IP addresses to associate
with VLAN IDs. The address provided in this field is used if the primary IP address is
unreachable.
Outside or None radio buttons.
Setting the Profile's NAT Configuration on page 5-103
8-2.
(NAT) direction.
for instructions on
Reset to revert to the last
Create icon to define
5 - 185