Table of Contents
Advertisement
Syslog Host
Syslog Port
13. Set the following
Data Limit
Limit
Action
14. Set the following
Logout FQDN
Logout FQDN
15. Select
OK
to save the changes made within the Basic Configuration screen. Select
configuration.
16. Select the
Web Page
tab to create HTML pages requesting wireless clients use to login and navigate within the captive
portal.
The
Login
page displays by default.
Use the drop-down menu to determine whether an IP address or a host name is used as a
syslog host. The IP address or host name of an external server resource is required to route
captive portal syslog events to that destination.
Define the numerical syslog port to route traffic with the external syslog server. The default is
514.
parameters:
Select the option to enable limiting usage. Use the spinner to set a maximum usage limit in
megabytes.
Use the drop-down to configure the action to be taken once the data limit is reached. Choose
from one of:
• Log only – Logs the event
• log-and-disconnect – Logs the event and disconnects the user.
parameters:
Configure the fully qualified domain name of the domain where the user will be redirected after
logging out of the captive portal.
Reset
to revert to the last saved
9 - 9
Hide quick links:
Advertisement
Table of Contents
