Motorola WiNG 5.4.2 System Reference Manual page 347

Max confirmed
Neighbors
Minimum signal
strength for smart-rf
neighbors
15. Select MINT Protocol.
Figure 5-180 Profile Overrides - Advanced Profile Overrides MINT screen - Settings tab
16. Refer to the Area Identifier
configuration.
Level 1 Area ID
17. Define or override the following Priority Adjustment settings:
Designated IS Priority
Adjustment
18. Select the Latency of Routing Recalculation
control used for defining or overriding a latency period from 0 - 60 seconds. The default setting has the check box disabled.
Use the spinner to set the maximum number of learned neighbors stored at this device.
Use the spinner to set the minimum signal strength of neighbor devices that are learnt
through Smart RF before they are recognized as neighbors.
The MINT Protocol screen displays the Settings tab by default.
field to define or override the Level 1 and Level 2 Area IDs used by the profile's MINT
Select the box to enable a spinner control for setting the Level 1 Area ID from 1 -
4,294,967,295. The default value is disabled.
Use the spinner control to set a Designated IS Priority Adjustment setting from -255 -
+255. This is the value added to the base level DIS priority to influence the Designated
IS (DIS) election. A value of +1 or greater increases DISiness. The default setting is 0.
check box (within the Shortest Path First (SPF) field) to enable the spinner
5 - 281