Ap Detection - Motorola WiNG 5.4.2 System Reference Manual

13 - 20 WiNG 5.4.2 Access Point System Reference Guide
Client Count
Radio Count
IP Address
Refresh

13.2.4 AP Detection

RF Domain Statistics
The AP Detection screen displays information about detected access points that are not members of the RF Domain. The could
be authorized devices or potential rogue devices.
To view device information on detected access points:
1. Select the Statistics
2. Select a RF Domain from under the System node on the top, left-hand side, of the screen.
3. Select AP Detection
The AP Detection
BSSID
Channel
Displays the number of clients connected with each listed access point. AP6522, AP6532,
AP6562, AP8132 and AP71xx models can support up to 256 clients per access point.
AP6511 and AP6521 models can support up to 128 clients per access point.
Displays the number of radios on each listed access point. AP7131N models can support
from 1-3 radios depending on the hardware SKU. AP6522, AP6532, AP6562, AP8132 and
AP71xx models have two radios. AP6511 and AP6521 models have one radio.
Displays the IP address each listed access point is using a network identifier.
Select the Refresh
menu from the Web UI.
from the RF Domain menu.
Figure 13-10 Rf Domain - AP Detection screen
screen displays the following:
Displays the Broadcast Service Set ID (SSID) of the network to which the detected access
point belongs.
Displays the channel of operation used by the detected access point. The channel must
be utilized by both the access point and its connected client and be approved for the target
deployment country.
button to update the statistics counters to their latest values.