Table of Contents
Advertisement
7 - 10 WiNG 5.4.2 Access Point System Reference Guide
Force L2 Path Recovery
3. Select
Add
to create a new L2TP V3 policy,
policies from the list of those available.
4. If creating a new L2TP V3 policy, assign it a
used by numerous L2TP V3 tunnels.
5. Define the following
Cookie size
Hello Interval
Indicates if L2 Path Recovery is enabled. When enables, it enables learning servers,
gateways and other network devices behind a L2TPV3 tunnel.
Edit
to modify the attributes of a selected policy or
L2TP V3 Policy Creation
Figure 7-6
Name
Policy Details
to add a device to a list of devices sanctioned for network operation:
L2TP V3 data packets contain a session cookie which identifies the session (pseudowire)
corresponding to it. Use the spinner control to set the size of the cookie field present within
each L2TP V3 data packet. Options include 0, 4 and 8. The default setting is 0. If using the CLI,
cookie size cannot be configured per session, and are the same size for all sessions with in a
tunnel.
Define an interval in either Seconds (1 - 3,600), Minutes (1 -60) or Hours (1) between L2TP V3
hello keep alive messages exchanged within the L2TP V3 control connection. The default
setting is 1 minute.
screen
up to 31 characters in length. Remember, a single L2TP V3 policy can be
Delete
to remove obsolete
Hide quick links:
Advertisement
Table of Contents
