Ospf Interface - Motorola WiNG 5.4.2 System Reference Manual

13.3.15.5 OSPF Interface

OSPF
An OSPF interface is the connection between a router and one of its attached networks. An interface has state information
associated with it, which is obtained from the underlying lower level protocols and the routing protocol itself. A network
interface has associated a single IP address and mask (unless the network is an unnumbered point-to-point network). An
interface is sometimes also referred to as a link.
To view OSPF interface statistics:
1. Select the Statistics
2. Select System
point for statistical observation.
3. Select OSPF.
4. Select the OSPF Interface
The OSPF Interface
Interface Name
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen), expand the default node and select an access
tab.
Figure 13-54 Access Point - OSPF Interface tab
tab describes the following:
Displays the IP addresses and mask defined as the virtual interface for dynamic OSPF routes. Zero
config and DHCP can be used to generate route addresses, or a primary and secondary address can
be manually provided.
13 - 99