Traffic Statistics - Motorola WiNG 5.4.2 System Reference Manual

The RF Statistics
Radio
Signal
SNR
Tx Physical Layer
Rate
Rx Physical Layer
Rate
Avg Retry Rate
Error Rate
Traffic Index
RF Quality Index
Refresh

13.2.7.3 Traffic Statistics

Radios
To view RF Domain member access point radio traffic statistics:
1. Select the Statistics
2. Select a RF Domain from under the System node on the top, left-hand side, of the screen.
3. Expand Radios
screen displays the following:
Displays the name assigned to each listed RF Domain member radio. Each name displays as a
link that can be selected to display radio information in greater detail.
Displays the power of listed RF Domain member radio signals in dBm.
Displays the signal to noise ratio (SNR) of each listed RF Domain member radio.
Displays the data transmit rate for each RF Domain member radio's physical layer. The rate is
displayed in Mbps.
Displays the data receive rate for each RF Domain member radio's physical layer. The rate is
displayed in Mbps.
Displays the average number of retries for each RF Domain member radio.
Displays the average number of retries per packet. A high number indicates possible network
or hardware problems.
Displays the traffic utilization index of each RF Domain member access point radio. This is
expressed as an integer value. 0 – 20 indicates very low utilization. 60 and above indicates
high (optimal) utilization.
Displays an integer (and performance icon) that indicates the overall RF performance for each
listed radio. The RF quality indices are:
• 0 – 50 (Poor)
• 50 – 75 (Medium)
• 75 – 100 (Good)
Select the Refresh
menu from the Web UI.
from the RF Domain menu and select
button to update the statistics counters to their latest values.
Traffic Statistics.
13 - 27