Motorola WiNG 5.4.2 System Reference Manual page 665

Keep Alive
The Proxy tab displays the following:
Mesh Point Name
MP ID
Proxy Address
Age
Proxy Owner
VLAN
6. Select Device Data Transmit.
Figure 13-19 RF Domain - Mesh Point Device Data Transmit screen
7. Review the following transmit and receive statistics for Mesh nodes:
Data Bytes (Bytes):
Transmitted Bytes
Data Bytes (Bytes):
Received Bytes
Yes indicates that the local MP will act as a supplicant to authenticate the link and not let
it expire (if possible). No indicates that the local MP does not need the link and will let it
expire if not maintained by the remote MP.
Displays the name of each configured Mesh Point in the RF Domain.
The MP identifier is used to distinguish between other Mesh Points both on the same
device and on other devices. This is used by a user to setup the preferred root
configuration.
Displays the MAC Address of the proxy used in the mesh point.
Displays the age of the proxy connection for each of the mesh points in the RF Domain.
The Owner (MPID) is used to distinguish the device that is the neighbor.
The VLAN ID used as a virtual interface with this proxy. A value of 4095 indicates that
there is no VLAN ID.
Displays the total amount of data, in Bytes, that has been transmitted by Mesh Points in
the RF Domain.
Displays the total amount of data, in Bytes, that has been received by Mesh Points in the
RF Domain.
13 - 39