Nat Translations - Motorola WiNG 5.4.2 System Reference Manual

Friendly String
Hit Count
Refresh

13.3.21.5 NAT Translations

Firewall
To view the Firewall's NAT translations:
1. Select the Statistics
2. Select System
connected access points.
3. Select Firewall
4. Select NAT Translations.
The NAT Translations
Protocol
Forward Source IP
Forward Source Port
Forward Dest IP
This is a string that provides information as to which firewall the rules apply.
Displays the number of times each WLAN ACL has been triggered.
Select the Refresh
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its
and expand the menu to reveal its sub menu
Figure 13-72 Access Point - Firewall Nat Translation screen
screen displays the following:
Lists the NAT translation IP protocol as either TCP, UDP or ICMP.
Displays the source IP address for the forward NAT flow.
Displays the source port for the forward NAT flow (contains ICMP ID if it is an ICMP flow).
Displays the destination IP address for the forward NAT flow.
button to update the screen's statistics counters to their latest values.
items.
13 - 129