Table of Contents
Advertisement
12 - 12 WiNG 5.4.2 Access Point System Reference Guide
2. Click the down arrow next to the device to view a set of operations that can be performed on the selected device.
3. To locate the device, click the
4. Use the spinner to set a value for
locating it. Once this duration expires, the LEDs starts operating normally.
5. Click
Locator ON
operation. Click
12.1.4 Upgrading Device Firmware
Devices
To update the firmware of an access point:
1. Select a target device from the left-hand side of the UI.
2. Click the down arrow next to the device to view a set of operations that can b performed on the selected device.
Figure 12-15 Device Pane
Figure 12-16 Device Pane - Options for a device
Flash LEDs
item.The following windows displays.
Figure 12-17 Device Pane - Locator screen
Flash LED Duration.
to start flashing the LEDs. Click
Close
to close this window.
This is the duration, in minutes, the device will flash its LEDs for
Locator OFF
to stop the LEDs from flashing and resume normal
Hide quick links:
Advertisement
Table of Contents
