Motorola WiNG 5.4.2 System Reference Manual page 622

12 - 50 WiNG 5.4.2 Access Point System Reference Guide
3. Refer to the following to determine whether Smart RF calibrations or interactive calibration is required.
AP MAC Address
Radio Index
Old Channel
Channel
Figure 12-46 Smart RF screen
Displays the hardware encoded MAC address assigned to each access point radio
within the RF Domain. This value cannot be modified as past of a calibration activity.
Displays a numerical index assigned to each listed access point radio when it was
added to the network. This index helps distinguish this radio from others within the
RF Domain with similar configurations. This value is not subject to change as a result
of a calibration activity, but each listed radio index can be used in Smart RF
calibration.
Lists the channel originally assigned to each listed access point within the RF
Domain. This value may have been changed as part an Interactive Calibration process
applied to the RF Domain. Compare this Old Channel against the Channel value to
right of it (in the table) to determine whether a new channel assignment was
warranted to compensate for a coverage hole.
Lists the current channel assignment for each listed access point, as potentially
updated by an Interactive Calibration. Use this data to determine whether a channel
assignment was modified as part of an Interactive Calibration. If a revision was made
to the channel assignment, a coverage hole was detected on the channel as a result
of a potentially failed or under performing access point radio within the RF Domain.