Motorola WiNG 5.4.2 System Reference Manual page 589

5. Refer to the following to configure the required AP upgrade parameters:
AP Type List
Scheduled Upgrade Time
Schedule Reboot Time
No Reboot
Figure 12-23 Devices - Adopted AP Upgrade screen
Select the access point model to specify which model is available to upgrade by the
Virtual Controller AP. Upgrades can only be made to the same access point model. For
example, an AP6532 firmware image cannot be used to upgrade an AP7131 model
access point. For that reason, the drop-down menu will only display the model
deployed.
To perform the upgrade immediately, select Now. To schedule the upgrade to take
place at a specified time, enter a date and time. Select whether you require an
immediate reboot once the AP is updated. If you would like a reboot later, schedule
the time accordingly. The AP must be rebooted to implement the firmware upgrade.
Select No Reboot to ensure the access point remains in operation with its current
firmware. This option is useful to ensure the access point remains operational until
ready to take it offline for the required reboot.
To reboot a target access point immediately, select Now. To schedule the reboot to
take place at a specified time in the future, enter a date and time. This feature is
helpful when wishing to upgrade an access point's firmware, but wish to keep in
operation until the reboot does not impact its current client support and operation.
Select this option to prevent upgraded access points from being rebooted. This
ensures that the access point remains in operation with its current firmware. This
option is useful to ensure that the access point remains operational till ready to take
it offline for the required reboot.
12 - 17