JRC JMA-9133-SA Instruction Manual page 376

>
JMA-9100 Instruction Manual 7.SETTINGS FOR SYSTEM OPERATION
2) Perform the following menu open procedure to open the ALR
Output menu.
Click the item button corresponding to the item to be changed.
3)
The item is turned on / off.
7.2.9.5 Setting the External Acknowledgement (External ACK Setting)
This function enables the control of system when ACK sentence have received.
Procedures
Open the Serviceman Menu.
1)
2) Perform the following menu open procedure to open the External
ACK Setting menu.
3) Click the item button corresponding to the menu to be changed.
2. Installation Menu
→ 6. Alarm System
→
2. Relay Output
: The ALR sentence is output when alarm have issued.
On
: The ALR sentence is not output when alarm have issued.
Off
: The internal alarm.
1. System Alarm
: Target Tracking Alarms and AIS Function Alarms.
2. TT/AIS Alarm
2. Installation Menu
→
6. Alarm System
→ 5. External ACK Setting
：CPA/TCPA alarm.
Critical Alarm
：Exept Critical Alarm.
Normal Alarm
7－ 24
>
7.2 SETTINGS