JRC JMA-9133-SA Instruction Manual page 309

JMA-9100 Instruction Manual
4) Set an ending bearing and range by turning the [EBL] dial and
[VRM] dial, and left-click.
5.3.7.4 AIS Filter Display On/Off (Filter Display)
Procedures
1) Open the AIS Filter Setting menu by performing the following
menu operation.
AIS
→
2) Left-click the item button of
Filter Display will be set to on or off.
5.3.7.5 Display of Targets outside AIS Filter (Filter Mode)
Procedures
Open the Filter Mode menu by performing the following menu
1)
operation.
AIS
→
2) Left-click the item button of
>
5.OPERATION OF TARGET TRACKING AND AIS
When the automatic activation function is enabled, the filter
i
range is automatically changed for covering the automatic
activation zone. Thus, the automatic activation zone is always
within the filter range.
4. AIS Filter Setting
4. AIS Filter Setting
Display : Displays only AIS targets in the AIS filter.
: Displays AIS targets in the AIS filter by priority, and also
Priority
displays targets outside the AIS filter.
Activated AIS targets can be displayed even when they are
i
outside the AIS filter.
5－ 35
3. Filter Display
.
6. Filter Mode
.
>
5.3 AIS OPERATION
5