JRC JMA-9133-SA Instruction Manual page 229

3.8.8.6 Course Bar Setting
• The Course Bar Setting menu will appear.
[1] Course Bar Display
• Determine whether to display the bar graph for the course data that has been
received on the radar display.
• One of two digital information areas is used to display data.
• When the course-bar graph is displayed, the sizes of the target tracking (TT)/
AIS numeric data display areas are exclusively decreased.
• Left-click the
course bar display function is switched between On and Off.
[2] Autopilot Course
• Determine which field of the APB sentence that has been received is used to
display AP course.
[3] ROT Scale
• Set the maximum scale for the TURN Rate graph.
JMA-9100 Instruction Manual
button located at the lower righit of the display. The
Target
: The course bar graph is not displayed.
Off
: The course bar graph is displayed in digital information area 1.
Area1
Area2 : The course bar graph is displayed in digital information area 2.
Course to Steer
：Heading to Steer to Destination
From Origin
：Bearing Origin to Destination
From CURR POSN ：Bearing, Present Postion to Destination
30-0-30
: The scale is set at ±30°/min.
60-0-60 : The scale is set at ±60°/min.
90-0-90 : The scale is set at ±90°/min.
120-0-120 : The scale is set at ±120°/min.
150-0-150 : The scale is set at ±150°/min.
300-0-300 : The scale is set at ±300°/min.
3 －109
> >
3.BASIC OPERATION 3.8 APPLIED OPERATIONS
3