JRC JMA-9133-SA Instruction Manual page 109

>
JMA-9100 Instruction Manual 2.CONTROL PANEL KEYS and SOFTWARE BUTTONS
Past position display interval switching
6
The past position display interval is switched whenever the button is clicked.
Past position display interval unit switching
7
The past position display interval unit is switched whenever the button is clicked.
min NM
⇒
AIS On / Off
8
The AIS display is switched to On / Off whenever the button is clicked.
Tracked target symbol display On / Off
9
The tracked target symbol display is switched to On / Off whenever the button is
clicked. Use this function to avoid confusion with the AIS symbol.
AIS target symbol display On / Off
10
The AIS target symbol display is switched to On / Off whenever the button is clicked.
Use this function to avoid confusion with the tracked target symbol.
Association On / Off
11
The tracked target / AIS target association is switched to On / Off whenever the button is
clicked.
AIS filter mode switching
12
The AIS filter is switched whenever the button is clicked.
Range
⇒
Radar trails display true / relative switching
13
Radar trails are switched to
whenever this button is clicked.
This setting is restricted by the radar display motion mode.
In relative motion display mode (RM), switching to
In true motion display mode (TM), only
Radar trails display time switching
14
The radar trails display time is switched whenever the button is clicked.
If the time does not reach the radar trails time that was set, the remaining time is
displayed on the right-hand side.
If the button is clicked for 2 seconds, the RADAR Trails Setting menu is opened.
min
⇒
Sector Zone
⇒ ⇒
T
(true motion trail) /
T
2－ 25
>
2.3 FUNCTIONS OF SOFTWARE
Range
R
(relative motion trail)
T R
/ is possible.
can be set.
BUTTONS
2