JRC JMA-9133-SA Instruction Manual page 99

>
JMA-9100 Instruction Manual 2.CONTROL PANEL KEYS and SOFTWARE BUTTONS
[DATA OFF] (DATA Off) key
23
This function sets the graphics other than HL, range ring, EBL, and VRM to OFF
temporarily while this key is pressed.
→ 3.4.11 on page 3-34
[PANEL] (Operator panel brilliance) key
24
This function adjusts the lighting brilliance of various switches and dial positions on the
operator panel. The brightness changes cyclically whenever this key is pressed.
→ 3.4.13 on page 3-35
[USER] key
25
By pressing this key, the signal processing setting that is preset can be called.
The setting changes to FUNC OFF ==> FUNC1 ==> FUNC2 ==> FUNC3 ==>
FUNC4 whenever this key is pressed.
If this key pressed for 2 seconds or more, the function setting menu is displayed.
→ 3.9 on page 3-111
[OPTION1] key
26
By pressing this key, the pre-registered menu position can be directly displayed.
At factory shipment, the calling of [Main Menu] is assigned.
→ 3.8.7 on page 3-103
[OPTION2] key
27
By pressing this key, the pre-registered menu position can be directly displayed.
At factory shipment, the calling of [Sub Menu] is assigned.
→ 3.8.7 on page 3-103
Track ball
28
This function moves the cursor mark to any position. Use this function for setting in
each mode.
Use this function to specify a center position of floating EBL and an off-center position.
→ 3.3.1 on page 3-14
[Track ball left button]
29
Use this function to confirm menu selection and numeric value input.
[Track ball right button]
30
Use this function to reset menu selection and numeric value input.
[BRILL] (Brilliance dial)
31
This dial is provided at the right of the monitor. Use this function to adjust the brilliance
of the monitor.
→ 3.2.1 on page 3-6
>
2.2 NAMES AND FUNCTIONS OF
2－ 15
CONTROL PANEL KEYS
2