Switch Day/Night Mode [Day/Night]; Adjust Operation Panel Brilliance [Panel] - JRC JMA-9133-SA Instruction Manual

3.4.12

Switch Day/Night Mode [DAY/NIGHT]

Several combinations of the display color and brilliance according to the ambient
lighting conditions are provided. The display color setting is easily changed.
Procedures
1) Press the [DAY/NIGHT] key. Alternatively, left-click the Day/Night
button located at the lower right of the radar display.
The DAY/NIGHT modes are switched.
→
Day1
The current mode is displayed at the lower right of the radar display.
For how to set the display color and brilliance for each mode, see Section 3.8.5 "Set Radar
Display (Display Setting)"
3.4.13

Adjust Operation Panel Brilliance [PANEL]

Adjust brilliance of the operation panel according to the ambient lighting
conditions.
Procedures
1) Press the [PANEL] key. Alternatively, left-click the
button located at the lower right of the radar display.
In consideration of the ambient brightness, adjust panel brilliance that is high enough to read
the characters on the operation panel but does not glare.
The [PANEL] key lamp lights up irrespective of panel brilliance adjustment.
>
JMA-9100 Instruction Manual 3.BASIC OPERATION
→ →
Day2 Day3
← ←
Day2 Day3
3－ 35
>
3.4 GENERAL RADAR OPERATION
Dusk
←
Dusk Night
3
Panel
○