>
JMA-9100 Instruction Manual
2.CONTROL PANEL KEYS and SOFTWARE BUTTONS
Interference rejection (IR) mode switching
2
The interference rejection mode is switched whenever this button is clicked.
IR Off
⇒
Target enhance (ENH) mode switching
3
The target enhance mode is switched whenever this button is clicked.
ENH Off
⇒
Radar video processing (PROC) mode switching
4
The radar video processing mode is switched whenever this button is clicked.
PROC Off
Remain
⇒
Function (FUNC) mode switching
5
The function mode is switched whenever this button is clicked.
FUNC Off
Storm
⇒
If the button is clicked for 2 seconds, the function registration menu (User Function
Setting) is opened.
and
, ,
6
7
8
9
Adjust the gain, sea clutter suppression, rain / snow clutter suppression and tune using
the track ball.
If the button is clicked on, the adjustment value is shown at the upper-right of the cursor.
Make adjustments by moving the track ball to the left and right. Determine the
adjustment by left-clicking.
and
Sea clutter suppression (Sea) mode, Rain and snow clutter
,
10
11
12
suppression (Rain) mode, and Tune mode switching
Use these functions to switch to the manual or automatic mode of sea clutter
suppression, rain and snow clutter suppression, and tune. The bar on the left side
indicates the position of the dial.
The mode is switched to
button is clicked. If rain and snow clutter suppression is switched to an automatic mode,
sea clutter suppression is switched to an automatic mode also.
IR Low
IR Meddle
⇒
ENH Level1
ENH Level2
⇒
3Scan CORREL
⇒
⇒
Peak Hold
⇒
Coast
⇒
⇒
FUNC Off
⇒
Gain, Sea clutter suppression(Sea)、Rain / snow
clutter suppression (Rain), Tune adjustment (Tune)
MAN
(manual) /
2- 19
>
2.3 FUNCTIONS OF SOFTWARE
IR High
⇒
⇒
ENH Level3
⇒
⇒
4Scan CORREL
⇒
PROC Off
⇒
Deep Sea
⇒
AUTO
(automatic) whenever the
BUTTONS
IR Off
2
ENH Off
5Scan CORREL
Fishnet