JRC JMA-9133-SA Instruction Manual page 483

External alarm
Acknowledge
Watchman reset
Remote maintenance
AIS alarm acknowledge
External monitor
i. Only with Navigation Equipment is connected.
ii. The Speed measuring accuracy of speed sensor shall confirm to IMO Resolution MSC.96(72).
The measuring accuracy of GPS shall confirm to IMO Resolution MSC.112(73).
iii. Can't be use for target tracking.
>
JMA-9100 Instruction Manual 11.SPECIFICATION
Heading data HDT,THS
Default setting normally closed contact
Maximum current
Contact output
Contact output
JRC format (MNT port at terminal board TB4601)
ACK (AIS port at terminal board TB4601)
Multi scan monitor
11 －19
>
11.17 DISPLAY UNIT (NCD-4990)
200mA
(SYSALM, ALPAALM, PWRALM
port at terminal board TB4601)
(ACKOUT port at terminal board TB4401)
(WMRST port at terminal board TB4401)
Analog RGB, HD15pin Connector 2 port
11