Table of Contents
Advertisement
PLANNED ROUTE (Navigating according to a
planned route)
• Select PLANNED ROUTE to display the ROUTE LIST screen and
N E W
two Soft Keys
R O U T E
• Select a route and press the
selected route.
• To make registration of a new route, press the
"Storing a new Route" p.83)
• To delete all registrations, press the
routes" p.84)
TEMPORARY ROUTE (Navigating according to a
temporary route)
Select TEMPORARY ROUTE to enter the Temporary Route
TEMP
Mode. And press
ROUTE
Create a temporary route in the chart and start the navigation along the
route. The following four soft keys appear.
Erasing all temporary waypoints.
A L L
E R A S E
If you erase one waypoint then point the one and push
Joystick
Moving a waypoint that pointed by cursor.
MOVE
1. Point the waypoint by cursor and press this key.
2. Move cursor to desire position and press
Inserting a new waypoint into created temporary route.
I N S
1. Point the waypoint of Leg (: A part of route) that
inserts it by cursor.
2. Press this key.
3. Move cursor to desire position and press
Finish making a temporary route.
F I N I S H
Planning a temporary route and starting navigation
• You can make a temporary route consisting of waypoints specified
arbitrarily and temporarily. The temporary route is not stored in the
list unless you purposely do so.
• Specify a waypoint in the chart as the start point by pressing
to move the cross cursor and pushing it. Do the same procedure to
specify temporal waypoints you want to go. You can specify up to 100
waypoints in a route. After specifying all waypoints you want to go,
F I N I S H
press
key. Two soft keys
START
• Press the
key to display the START NAVIGATION popup,
NAV
select YES and press Joystick then begin the navigation.
A L L
and
.
E R A S E
to start the navigation by the
Joystick
A L L
. (Refer to "Erasing all
E R A S E
key to enter the mode directly.
.
S T A R T
and
N A V
NEW
. (Refer to
ROUTE
.
Joystick
.
Joystick
Joystick
M E M O R Y
are displayed.
75
Advertisement
Table of Contents
