JRC JMA-9133-SA Instruction Manual page 203

Display character size
(SEL NUM/Comment Size)
Waypoint bearing vector
(Waypoint Vector)
Display of bearing distance to the
destination(Status of Origin/DEST)
ON/OFF of Waypoint number display
(WPT Number Display)
Waypoint update
(Waypoint Switch Mode)
3.7.6.1 Color for the route alarm line (Off-Track Limit Line)
Route alarm lines are displayed on both sides of the center line of the route.
For this item, set which color is used to display each line.
Route alarm line
Route Alarm Color : Area A
Procedures
1) Open the WPT/Route Setting menu by performing the menu
operation below.
2) Left-click the set value of the
select an operation mode.
JMA-9100 Instruction Manual
:Specify the size of the numeric value and character displayed on
the radar display.
:Set the method to display line between next Waypoint and own
ship.
:Select the start point to be used for the bearing/distance display in
the Waypoint data display area.
:Set whether or not to display Waypoint number next to the
Waypoint mark.
:Set how to update Waypoint number when one Waypoint has been
reached.
Traveling direction
Area A (IALA-A)： The port-side is red and the bow-side is green
along the traveling direction.
Area B (IALA-B)： The port-side is green and the bow-side is red
along the traveling direction.
Route
→ 2. WPT/Route Setting
IALA-A
IALA-B
3－ 83
> >
3.BASIC OPERATION 3.7 USE ROUTE FUNCTION
Route alarm line
Traveling direction
Route Alarm Color: Area B
8. Off-Track Limit Line
: Area A
: Area B
3
item, and