Change Of Connection Pattern (With 2 Display Units - JRC JMA-9133-SA Instruction Manual

>
JMA-9100 Instruction Manual A.NQE-3141 Interswitch Unit
b. Display unit connected as master
c. Display unit connected as slave
If this button is clicked, select / cancel the display unit.
If this button is clicked in the naming a display unit or scanner unit mode , the name input
window is opened .
d. Name
If this button is clicked, set to the display or scanner unit rename mode.
e. File Operations
If this button is clicked, the File Operations menu is opened.。
f. Set
If this button is clicked, the change of connection is determined.
g. Exit
If this button is clicked, the Inter Switch Menu is closed .
A.2.3

Change of Connection Pattern (with 2 Display Units)

If two display units are installed, a connection pattern needs to be selected.
Procedures
1) Open the Inter Switch menu (with 2 Display Units).
2) Move the cursor onto the Connection pattern
Switch Menu" and Section a. "Connection pattern")
The connection pattern will be selected, and
Left-click the
3)
The connection pattern will be changed.
>
A.2 INTERSWITCH OPERATION
3. Set
button.
3. Set
A－ 6
(see Section A.2.2 "Inter
to be changed , and left-click.
(Section b. "Set") will blink.