JRC JMA-9133-SA Instruction Manual page 177

(Example)
The side line into which
a vertex is inserted
Inserted vertex
3.6.3.5 Correcting the mark or vertex of a line (Insert/Move Vertex)
With regard to the created user map, a mark or line is corrected.
Procedures
1) Open the Edit User Map menu by performing the following menu
operation.
The Edit User Map menu will appear.
2) Left-click the
The user map insertion/correction mode is selected.
Insert/Move
3) Put the cursor on the mark or vertex of a line, and left-click.
When the mark or vertex of a line to be corrected is selected, the
appear.
Move the
4)
The selected mark or vertex of the line is moved to the destination.
To correct another mark or vertex of a line, repeat procedures 3 and 4.
5) When finished with the correction of all items, left-click the
0.Exit
JMA-9100 Instruction Manual
U.Map
→ 2. Edit User Map
5. Insert/Move Vertex
is displayed in the cursor mode located at the upper right of the display.
cursor mark to the destination, and left-click.
button.
3－ 57
> >
3.BASIC OPERATION 3.6 DISPLAY USER MAP
button.
cursor mark will
3