Operating Ebl Maneuver Function (Ebl Maneuver Setting) - JRC JMA-9133-SA Instruction Manual

>
JMA-9100 Instruction Manual 4.MEASUREMENT OF RANGE AND BEARING
4.1.5

Operating EBL Maneuver Function (EBL Maneuver Setting)

4.1.5.1 Initial Setting (EBL Maneuver Setting)
Procedures
1) Open the EBL Maneuver Setting menu by performing the
following menu operation.
2) Set the following parameters.
For inputs to the value input screen, refer to Section 3.3.4 "Operation on Numeric Value,
Latitude / Longitude and Character Input menu".
Main
→ 1. EBL Maneuver Setting
Reach
:Set the range from when the rudder is steered to when
the ship beings to turn.
Turn Mode
:Select a turn mode.
:Select the setting for turning.
Turn Set
If Radius
If
Rate
A wrong initial setting affects the maneuver curve function
i
explained below.
4－ 14
>
4.1 USE OF NAVIGATION TOOLS
:Turning radius (NM)
Radius
:Rate of turn (deg/min)
Rate
is selected :Turning radius (NM)
is selected :Rate of turn (deg/min)