Overview Of Saved Function Setting Data - JRC JMA-9133-SA Instruction Manual

3.9.4

Overview of saved Function Setting Data

The overview of saved function setting data is as follows:
Factory-set data: : Saved data that general operation cannot change
Default data:
Data that can be
called:
Procedures
1) Open the User Function Setting menu by performing the menu
operation below.
FUNCTION SETTING
Factory-set data
5-[9
Coast
Deepsea
Fishnet
Storm
Calm
Rain
Bird
Long
Buoy
User1
User2
page 1-[1] Mode
• Calls the default value of the mode, and saves it for the function number.
page 1-[6] Save Present State
• The currently operating state can be saved for the function number.
• Use this function to save the state of good setting that will be frequently used.
page 5-[8] Set Mode Default
• Saves the setting of the current function number, as the default setting of the
mode.
page 5-[9] Initialize
• Changes the memory contents of the mode, which is used with the current
function number, back to the factory setting.
>
JMA-9100 Instruction Manual 3.BASIC OPERATION
: Standard data of each function mode that users can change
: Saved data that can be called by pressing the [USER] key
Main
→ 3. RADAR Menu
→ 1. Process Setting
→
FUNCTION SETTING
Default data
1-[1
Coast
Deepsea
Fishnet
Storm
Calm
Rain
5-[8
Bird
Long
Buoy
User1
User2
3－ 117
>
3.9 USE FUNCTION KEY [USER]
8. User Function Setting
FUNCTION SETTING
Data that can be called
FUNC1
FUNC2 【 USER】
FUNC3
FUNC4
1-[6
Current data
Present
3