Vrm Operation - JRC JMA-9133-SA Instruction Manual

JMA-9100 Instruction Manual
EBL1
VRM1

VRM Operation

The range value of the current
VRM1/2 range located at the upper right of the display. The currently operable VRM1 or
VRM2 is highlighted in the
display.
4.1.3.4 To operate VRM (VRM)
Procedures
Press the [VRM1] or [VRM2] key.
1)
The
VRM1
highlighted, and the selected VRM becomes operable.
2) Turn the [VRM] dial.
To turn the [VRM] dial to the right, the VRM control wide, to turn the [VRM] dial to the
left, the VRM control narrow.
Cancel
1) Press the [VRM1] or [VRM2] key again.
The selected EBL display will disappear.
>
4.MEASUREMENT OF RANGE AND BEARING
or
VRM1
VRM1
VRM2
and buttons (located at the upper right of the display) will be
VRM2
4－ 7
>
4.1 USE OF NAVIGATION TOOLS
EBL2
VRM2
on the PPI display is shown in the
VRM2
button located at the upper right of the
4