Decision Of Targets As Identical (Association); Setting Of Function To Decide Targets As Identical (Association); Setting Of Conditions For Deciding Ais And Tracked Targets As Identical (Association Setting) - JRC JMA-9133-SA Instruction Manual

>
JMA-9100 Instruction Manual 5.OPERATION OF TARGET TRACKING AND AIS
(Association)
5.4
DECISION OF TARGETS AS
IDENTICAL (Association)
5.4.1 Setting of Function to Decide Targets as Identical
(Association)
When an AIS target and a tracking target are decided to be identical, an
association symbol is displayed for the targets regarded as identical. In this case,
the AIS target symbol is automatically activated.
Procedures
1) Left-click the
right of the display.
Association will be set to on or off.
5.4.2 Setting of Conditions for Deciding AIS and Tracked Targets
as Identical (Association Setting)
Procedures
Open the Association Setting menu by performing the following
1)
menu operation.
AIS
The Association Setting menu will appear.
2) Select and enter the item to be set.
Conditions for deciding targets as identical will be set. When the differences of all item
between AIS and tracked target are under the set conditions..
Attention
• Turn off
Association
on if targets are identical, or in order to display
symbols that have disappeared.
Association
→
1. Association Setting
5－ 38
>
5.4 DECISION OF TARGETS AS IDENTICAL
in order not to make a decision
in Target Information located at the upper