JRC JMA-9133-SA Instruction Manual page 108

>
JMA-9100 Instruction Manual 2.CONTROL PANEL KEYS and SOFTWARE BUTTONS
BUTTONS
Target tracking (TT) / AIS information
① Target vector display
true / relative switching
③ CPA limit setting
⑤ Past position display
true / relative switching
⑧ AIS
On / Off
⑨ Tracked target symbol
display On / Off
⑩ AIS target symbol display
On / Off
Target vector display true / relative switching
1
The tracked target / AIS target vector display is switched to
(relative vector) whenever this button is clicked.
This setting is switched together with the past position display true / relative switching.
Target vector length setting
2
Set a vector length of the tracked target / AIS target.
If this button is clicked, the numeric value input screen is opened. After setting the
length, determine the setting by clicking
CPA limit setting
3
Set a CPA limit.
If this button is clicked, the numeric value input screen is opened. After setting the limit,
determine the setting by clicking
TCPA limit setting
4
Set a TCPA limit.
If this button is clicked, the numeric value input screen is opened. After setting the limit,
determine the setting by clicking
Past position display true / relative switching
5
The tracked target / AIS target past position display is switched to
position) /
This setting is switched together with the target vector display true / relative switching.
② Target vector length setting
⑬ Radar trails display
true / relative switching
ENT
ENT
R (relative past position) whenever the button is clicked.
2－ 24
>
2.3 FUNCTIONS OF SOFTWARE
④ TCPA limit setting
⑥ Past position display
interval switching
⑦ Past position display
interval unit switching
⑪ Association
On / Off
⑫ AIS filter mode switching
⑭ Radar trails display time
switching
T
ENT
.
.
.
R
(true vector) /
T (true past