JRC JMA-9133-SA Instruction Manual page 107

JMA-9100 Instruction Manual
CPA ring display On / Off
8
The CPA ring display is switched to On / Off whenever the button is clicked.
When the target vector display mode is
On.
Own ship's information
① Heading device
switching
② Speed sensor
switching
③ Time display mode
switching
Heading device switching
1
The heading device is switched whenever this button is clicked.
GYRO
When the selected heading device is not connected to the equipment, an alarm is issued.
Speed sensor switching
2
The speed sensor is switched whenever the button is clicked.
MAN
log) ⇒
When the selected speed device is not connected to the equipment, an alarm is issued.
Time display mode switching
3
The time display mode
switched whenever this button is clicked.
Manual own ship's speed setting
4
When selection of the speed sensor is set to
manually.
If this button is clicked, the numeric value input screen is opened. After setting a value,
determine the entry by clicking
>
2.CONTROL PANEL KEYS and SOFTWARE BUTTONS
CMPS (Electronic compass)⇒
⇒
LOG
(Manual) ⇒ (Single-axis water log) ⇒
2AXG
(Dual-axis ground log) ⇒
UTC
(universal time clock) /
ENT
2－ 23
>
2.3 FUNCTIONS OF SOFTWARE
T (true vector), the CPA ring cannot be set to
④ Manual own ship's speed
setting
GYRO
2AXW
(Dual-axis water
GPS MAN
⇒
LMT
(local mean time) is
MAN , enter the own ship's speed
.
BUTTONS
2