JRC JMA-9133-SA Instruction Manual page 444

>
JMA-9100 Instruction Manual 9.TROUBLE SHOOTING AND AFTER-SALES SERVICE
Message
Approach
Arrival
Break Off(WPT)
Cross Track Error
i. ALR No.: Unique alarm number in ALR sentence and ACK sentence
Message
Can't Transmit
Card Full
Copy Failed
Delete Failed
Format Card
Format Failed
Invalid Card
Invalid Connection
Invalid Data
Invalid Range
MAX Point
No Card
No Heading Data
No Object
No Position Data
Not Allowed
Out of Range
Read Failed
Slave Mode
Write Failed
i. ALR No.: Unique alarm number in ALR sentence and ACK sentence
Table9-5： List of Route Messages and Warnings
Class Description
Alarm Approach the route.
Alarm Arrive at way point.
Alarm Out of the way point.
Alarm Go off the route.
Table9-6： List of Operational Alarm Messages and Warnings
Class Description
INFO Tried to transmit within 5 second after standby or
when the transmitter-receiver has any trouble.
INFO Card: Run out of free space.
INFO Card: Copy failure.
INFO Card: Deletion failure.
INFO Card: Unformatted card.
INFO Card: Format failure.
INFO Card: Invalid card.
INFO The operator set performance monitor to on without
selecting straight.
INFO Tried to enter any data beyond its range.
INFO TM selection due to TM-disabled range (96 nm).
Zooming in a ZOOM-disabled range (0.125 nm).
INFO Tried to enter navigation information beyond the
specified.
INFO Card not detected yet.
INFO Target tracking operation or TM selection when
bearing data is invalid.
INFO No object at the cursor-specified position.
INFO Mark or line input when the latitude and longitude is
invalid.
INFO General operation error.
INFO Out of target acquisition range.
INFO Card: Read failure.
INFO Operation of a menu for the scanner unit when the
slave mode is active.
INFO Card: Write failure.
>
9.1 FAULT FINDING
9－ 4
i
ALR No.
i
ALR No.