Adding Tracked Target Id Name (Name) - JRC JMA-9133-SA Instruction Manual

>
JMA-9100 Instruction Manual 5.OPERATION OF TARGET TRACKING AND AIS
5.2.5

Adding Tracked Target ID Name (Name)

The system can enter a name for each of tracking targets that have been acquired.
Procedures
1) Put the cursor on the tracked target, and right-click.
The cursor mode list will appear.
2) Left-click
The Property will appear.
3) Left-click the item button of
The setting items for ship name (Name) will be displayed.
Select the input method.
4)
5.2.5.1 Entering a new ship name (Input)
5) Input a new ship name.
Up to 8 characters can be input as a ship name.For the input method on the character input
screen, see Section 3.3.4.7 "Entering a character".
The input name by selecting
5.2.5.2 Selecting one of previously input ship names (Data Base)
5) Press the [numeric] key corresponding to the ship name to be
selected.
The selected ship name will be entered.
8. Property
:Selection
Data Base
names.When this method is selected, a list of ship
names that have been input by selecting
will be displayed.
:Input of a new ship name. When this method is
Input
selected, the ship name (Name) input window will
open.
Input
Data Base can contain 30 ship names.
i
5－ 20
>
5.2 TARGET TRACKING OPERATION
.
1. Name
of one of previously
is saved in Data Base .
input ship
Input