JRC JMA-9133-SA Instruction Manual page 192

>
JMA-9100 Instruction Manual 3.BASIC OPERATION
4) On the radar display, put the cursor on the line extending
between Waypoints that is to have its Planned Speed corrected.
The section that is to have its Planned Speed corrected is specified, and the new Planned
Speed is applied to the section.
5) To correct the Planned Speed of another section, repeat
procedures 3 and 4.
To finish correcting Planned Speed, left-click the
6)
4. Correct Planned Speed
The Planned Speed correcting mode will be cancelled.
(Example)
Planned speed :
000
113T
8.00kn
3.7.2.5 Deleting a Waypoint (Delete Waypoint)
The specified Waypoint in the route data saved in the radar system is deleted.
Procedures
1) Open the Set Route Sequence menu by performing the menu
operation below.
2) Left-click the
The Waypoint deleting mode is selected.
>
3.7 USE ROUTE FUNCTION
button.
10.00kn
002
064T
9.00kn 10.0kn
001
Section that is to have its Planned Speed corrected
Route
→ 2. WPT/Route Setting
→ 3. Set Route Sequence
5. Delete
3－ 72
004
113T 064T
11.0kn 12.0kn
003
button.
113T
005