Transmitter Receiver Unit (Ntg-3225/3230); Display Unit (Ncd-4990) - JRC JMA-9133-SA Instruction Manual

JMA-9100 Instruction Manual
For details, refer to the coaxial cable installation procedure for S-band radars.
8.2.4

Transmitter Receiver Unit (NTG-3225/3230)

Wipe dust off the transmitter and receiver with a dry cloth or feather duster.
8.2.5

Display Unit (NCD-4990)

Dust accumulated on the screen will reduce clarity and darken the video. For
cleaning it, wipe it with a piece of soft cloth (flannel or cotton).
Do not wipe it strongly with a piece of dry cloth nor use gasoline or thinner.
>
8.COUNTERMEASURE FOR TROUBLE ...
• Do not apply strong shock to the coaxial cable by
striking it with a tool or hammering it. Otherwise, an
open circuit failure may result.
• Do not place anything heavy on the coaxial
cable.Otherwise, an open circuit failure may result.
• Do not twist or pull the coaxial cable.
• When cleaning the screen, do not wipe it too strongly
with a dry cloth. Also, do not use gasoline or thinner to
clean the screen. Otherwise the screen surface may be
damaged
8－ 5
>
8.2 MAINTENANCE ON EACH UNIT
8