JRC JMA-9133-SA Instruction Manual page 280

>
JMA-9100 Instruction Manual 5.OPERATION OF TARGET TRACKING AND AIS
5.1.2.2 Types and Definitions of AIS Target Symbols
Vector/
Symbol
AIS12
AIS12
AIS12
AIS12
NOTE: For details about AIS-SART, refer to Section 6.6 "DISPLAY OF AIS-
Definition
Sleeping target
Activated target
Target acquired in
automatic
acquisition zone
Outline display
AIS12
Numeric displayed
target
AIS12
Dangerous target
Lost target
AIS12
Sleeping AIS-SART
target
Activated
AIS-SART target
Numeric displayed
AIS-SART target
AIS12
Lost AIS-SART
target
AIS12
SART".
AIS-SART function is available in the display software ver. 01.01.
As for method of confirming software version, refer to Section 8.3.1.6
"System Information".
>
5.1 PREPARATION
Remarks
This symbol is displayed when received data is
valid.The direction of the triangle's vertex
indicates the target's bow or course.
The heading direction is displayed with a solid
line, and the course vector is displayed with a
dotted line. The line perpendicular to the
heading direction indicates the direction to
which the course is to be changed. This line
may not be displayed.
The alarm sounds.
The alarm message (New Target) turns red
and blinks.
The outlines of ships are displayed scaled
down.
When the numeric data is displayed, the target
symbol is enclosed in a square.
The alarm sounds.
The alarm message (CPA/TCPA) turns red
and blinks.The symbol turns red and enlarges.
The alarm sounds.
The symbol turns red, and indicates with X
mark.
The AIS-SART symbol is colored as well as
AIS target symbol
The target number displayed beside the
symbol.
When the numeric data is displayed, the target
symbol is enclosed in a square.
When the data of an AIS-SART target cannot
be received for 6 minutes, the lost target is
displayed.
5－ 6