Configuration And Management; Figure 1-8 Interface Of Successful Login - Huawei OceanStor S2600 Command Reference Manual

OceanStor S2600 Storage System
Command Reference
4.

Figure 1-8 Interface of successful login

The initial user name of the system administrator is admin. The initial password is
123456. After the first login, you need to change the password to ensure the system security.
You can use the
It is recommended to set the Internet Protocol (IP) of the controller for the first login. To set the
IP of the controller, you can use the
After configuring the IP addresses of the management network port, you can log in to the storage
system remotely for routine maintenance and management.

1.2.2 Configuration and Management

This topic introduces the settings you are recommended to do when you first log in to the CLI.
You are recommended to set the IP address of the management network interface on the
controller when you first log in to the CLI. For the commands and methods used in the settings,
see
Controller.
Issue 07 (2010-05-20)
Enter the user name and the password in the prompt of the CLI interface, as shown in
Figure 1-8.
CAUTION
8.5.1 chgpasswd
3.4 Commands of Setting the IP Address of the Management Network Interface on the
NOTE
The initial IP addresses of the management network interfaces of the controllers are 192.168.128.101 and
192.168.128.102.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
command to change the password.
3.4.1 chgctrlip command.
1 Introduction to the CLI
1-7