Taghycp - Huawei OceanStor S2600 Command Reference Manual

OceanStor S2600 Storage System
Command Reference
Usage Guidelines
l
l
l
l
Example
Create a HyperCopy of which the name is full_between_S2600, copy type is full copy, source
LUN ID is 1, target LUN link ID is 0, and target LUN ID is 2.
OceanStor: admin> createhycp -n full_between_S2600 -si 1 -tli 0 -ti 2
The command has been sent, please wait...
System Response
When the command is complete, you can run the showhycpinfo command to view the result.

9.2.9 taghycp

Function
The command taghycp is used to tag a HyperCopy.
Format
taghycp -i HyperCopy ID
Parameters
Keyword and Value Description
-i HyperCopy ID
Modes
Normal mode.
Level
Super administrator level and administrator level.
Issue 07 (2010-05-20)
At least one of the source LUN and target LUN is in the local S2600 storage system. If the
HyperCopy type is incremental copy, the source LUN must be in the local S2600 storage
system.
The target LUN must be no smaller than the source LUN.
A target LUN cannot be shared by multiple HyperCopy tasks.
A source LUN cannot be shared by multiple incremental HyperCopy tasks.
The HyperCopy ID. The value ranges from 0 to 63.
You can query the information by running the
showhycpinfo command.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Value-Added Service Management Commands
Default Value
None.
9-41