OceanStor S2600 Storage System
Command Reference
Usage Guidelines
The command showupstime is used to query the system time of a UPS.
Example
Query the system time of UPS 1.
OceanStor: admin> showupstime -i 1
Ups 1 System Time: 20090205193459
5.7.2 showupsstat
Function
The command showupsstat is used to query the information about all the states of a UPS.
Format
showupsstat [ -i ups id ]
Parameters
Keyword and Value
-i ups id
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
The command showupsstat is used to query the information about all the states of a UPS.
Example
Query the information about all the states of a UPS.
OceanStor: admin> showupsstat
Issue 07 (2010-05-20)
================================================
Ups Id 1 Information
------------------------------------------------
Heathy Status
Operate Status
Enough Time To Write
Discharge Status
Charge Status
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
The UPS ID. The value can
be 0 or 1.
| Normal
| OnLine
| yes
| No Discharge
| Not Average Charge
5 Device Management Commands
Default Value
None.
5-17