System Management Commands - Huawei OceanStor S2600 Command Reference Manual

OceanStor S2600 Storage System
Command Reference
About This Chapter
System management commands are mainly used to configure and query the running information
of the storage system.
4.1 System Information Query Commands
System information query commands are used to query the version information and license
information about the system, the temperature information and voltage information about the
device.
4.2 Controller Configuration Commands
The controller configuration commands are used to set the status of the controller to offline, and
to query the information about the controller.
4.3 File Management Command
File management command is used to download the alarms and logs on the storage system.
4.4 Configuration Management Commands
The configuration management commands are used to export the debug information, system
configuration information, and to import and export the configuration file.
4.5 Statistics Management Commands
The performance statistics management commands are used to make statistics upon performance
based on the interfaces or LUNs, and they are also used to clear the error codes on the FC host
ports.
4.6 Software Upgrade Commands
Software upgrade commands are used to upgrade the system software and SCSI Enclosure
Services (SES) Fiemware version.
4.7 Primary/Secondary Switchover Commands
Primary/Secondary switchover commands are used to set the state for system swapping and
query the system swapping state of the controller that the user logs in to.
4.8 System Reset Command
System reset command is used to reset the system.
4.9 System Time Changing Command
System time changing command is used to change the system time.
Issue 07 (2010-05-20)
4

System Management Commands

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 System Management Commands
4-1