Cli Idle Time Setting Command; Chgidletime - Huawei OceanStor S2600 Command Reference Manual

3 Basic Operation Commands

3.5 CLI Idle Time Setting Command

CLI idle time setting command is used to set CLI idle time.

3.5.1 chgidletime

3.5.1 chgidletime
Function
The command chgidletime is used to set the system idle time.
Format
chgidletime -t time
Parameters
Keyword and Value
-t time
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
If the user does not perform any operation during the idle time, the user exits the CLI
automatically after the idle time.
Example
Set the CLI idle time to ten minutes.
OceanStor: admin> chgidletime -t 10m
3-8
Description
The CLI idle time. The value
is an integer and is equal to or
more than two minutes. The
unit can be s (second), m
(minute), h (hour). The
default unit is s (second).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor S2600 Storage System
Command Reference
Default Value
None.
Issue 07 (2010-05-20)