Commands Of Setting The Ip Address Of The Management Network Interface On The Controller; Chgctrlip - Huawei OceanStor S2600 Command Reference Manual

3 Basic Operation Commands
3.4 Commands of Setting the IP Address of the Management
Network Interface on the Controller
Commands of setting the IP address of the management network interface on the controller is
used to set the IP address of the management network interface on the controller.

3.4.1 chgctrlip

3.4.2 showctrlip
3.4.1 chgctrlip
Function
The command chgctrlip is used to set the IP address of the management network interface on
the controller, the storage system will automatically restart after the IP address is modified.
Format
chgctrlip -c controller ID [ -a IP address ] [ -s subnet mask ] [-g gateway ]
Parameters
Keyword and Value
-c controller ID
-a IP address
-s subnet mask
-g gateway
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
The command chgctrlip is used to set the IP address of the management network interface on
the controller.
3-6
Description
The controller ID. The value
is A or B, and is case
insensitive.
The IP address of the
management network
interface on the controller.
The subnet mask.
The gateway.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor S2600 Storage System
Command Reference
Default Value
None.
None.
None.
None.
Issue 07 (2010-05-20)