Value-Added Service Management Commands - Huawei OceanStor S2600 Command Reference Manual

OceanStor S2600 Storage System
Command Reference
9
About This Chapter
Value-added service management commands are used to manage the value-added service of the
storage system.
9.1 Hyperimage Configuration Commands
Hyperimage configuration commands are used to create, delete, modify and query Hyperimage
information.
9.2 Hypercopy Configuration Commands
Hypercopy configuration commands are used to create, delete, modify, query Hypercopy
information and label Hypercopy.
9.3 LUN-Expanding Management Commands
LUN-expanding management commands are used to query the information about a expanded
LUN, add or delete a expanded LUN.
9.4 Initiator and target (controller) Configuration Commands
Initiator and target (controller) configuration commands are used to modify the information of
the initiator and target (controller).
9.5 Link information Configuration Commands
Link information configuration commands are used to query and modify link information.
9.6 Other Configuration Commands
Other configuration commands are used to manage some relative information of the storage
system.
Issue 07 (2010-05-20)
Value-Added Service Management
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

9 Value-Added Service Management Commands

Commands
9-1