Chgiscsiroute - Huawei OceanStor S2600 Command Reference Manual

OceanStor S2600 Storage System
Command Reference
This operation will lead to interrupt the service!
Do you want to continue? y or n: y

5.13.6 chgiscsiroute

Function
The command chgiscsiroute is used to set the routing information about an iSCSI host port.
Format
chgiscsiroute [ -d ] -c controller ID -p Port ID -a Dest IP address -s subnet mask -g gateway
Parameters
Keyword and Value
-d
-c controller ID
-p Port ID
-a Dest IP address
-s subnet mask
-g gateway
Issue 07 (2010-05-20)
Description
Delete the routing settings of
a specified iSCSI host port.
The controller ID. The value
is A or B, and is case
insensitive.
The ID of the iSCSI host port
on the controller. The value
ranges from 0 to 3.
S2600i: Each host port
l
module is configured with
four iSCSI host ports.
From left to right, the host
ports are numbered 0, 1, 2,
and 3 in sequence.
S2600C: Each host port
l
module is configured with
two FC host ports and two
iSCSI host ports. From left
to right, the iSCSI host
ports are numbered 0 and
1 in sequence.
The network segment which
the destination host belongs
to.
The subnet mask of the
destination host.
The gateway of the iSCSI
host port on the controller.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Device Management Commands
Default Value
None.
None.
None.
None.
None.
None.
5-31