Commands Of Querying The Information About Buzzer Status; Showbuzzerstatus - Huawei OceanStor S2600 Command Reference Manual

5 Device Management Commands
Usage Guidelines
When using this command, note the following items:
l
l
l
Example
Query the state information about all fan groups in the system.
OceanStor: admin > showfan
Subrack ID
5.12 Commands of Querying the Information About Buzzer
Status
Commands of querying the information about buzzer status are used to query the information
about the buzzer status.

5.12.1 showbuzzerstatus

5.12.2 chgbuzzerstatus
5.12.1 showbuzzerstatus
Function
The command showbuzzerstatus is used to query the state information about a buzzer.
Format
showbuzzerstatus
Parameters
None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
5-22
The command showfan is used to query the state information about all fan groups in the
system.
The command showfan -s subrack ID is used to query the state information about all fan
groups in a specified enclosure.
The command showfan -s subrack ID -i fan ID is used to query the state information about
a specified fan in an enclosure.
Fan Group ID
0
0
1
1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status
0 Normal
1 Normal
0 Second fan fault
1 Second fan fault
OceanStor S2600 Storage System
Command Reference
Level
Medium
Medium
N/A
N/A
Issue 07 (2010-05-20)