Showctrlip - Huawei OceanStor S2600 Command Reference Manual

OceanStor S2600 Storage System
Command Reference
Example
Set the IP address of the management network interface on the controller A to 10.10.10.1 , the
subnet mask to 255.255.0.0, and the gateway to 10.10.10.0.
OceanStor: admin> chgctrlip -c a -a 10.10.10.1 -s 255.255.0.0 -g 10.10.10.0

3.4.2 showctrlip

Function
The command showctrlip is used to query the information about the IP address of the controller.
Format
showctrlip[ -c controller ID ]
Parameters
Keyword and Value
-c controller ID
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
When using this command, note the following items:
l
l
Example
Query the information about the IP addresses of all controllers.
OceanStor: admin> showctrlip
Controller
Issue 07 (2010-05-20)
The command showctrlip is used to query the information about the IP addresses of all
controllers.
The command showctrlip -c controller ID is used to query the information about the IP
address of a specified controller.
IP Address
A 129.26.10.31
B 129.26.10.32
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
The controller ID. The value
is A or B, and is case
insensitive.
Subnet Mask Gateway
255.255.0.0 0.0.0.0
255.255.255.0 0.0.0.0
3 Basic Operation Commands
Default Value
None.
MAC Address
00:12:34:56:70:46
00:12:34:56:79:92
3-7