5 Device Management Commands
5.13.2 chgfps
Function
The command chgfps is used to change the rates of FC host ports.
Format
chgfps -c controller ID -i port ID -s speed
Parameters
Keyword and Value
-c controller ID
-i port ID
-s speed
Modes
Normal mode.
Level
Super administrator level and administrator level.
5-26
Description
The controller ID. The value
is A or B, and is case
insensitive.
The ID of an FC port. The ID
value ranges from 0 to 3.
S2600F: Each host port
l
module is configured with
four FC host ports. From
left to right, the host ports
are numbered 0, 1, 2, and
3 in sequence.
S2600C: Each host port
l
module is configured with
two FC host ports and two
iSCSI host ports. From left
to right, the FC host ports
are numbered 0 and 1 in
sequence.
The rate of an FC host port.
The value can be 0, 1, 2, or 4.
0: Auto-adaptation.
l
1: The rate of 1 Gbit/s.
l
2: The rate of 2 Gbit/s.
l
4: The rate of 4 Gbit/s.
l
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor S2600 Storage System
Command Reference
Default Value
None.
None.
None.
Issue 07 (2010-05-20)