LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual
5
Prerequisites
●
●
●
●
Procedure
Step 1 Press to open the covers on both sides of the battery pack.
Issue 02 (2023-02-28)
Replacing a Battery Management
Fault locating:
a.
Log in to the SmartLogger WebUI/CMU WebUI/FusionSolar app/
SmartPVMS to view alarm information.
b.
Refer to the alarm handling suggestions in the alarm list.
Tools: Phillips insulated torque screwdriver, insulated torque socket wrench
(including an extension bar longer than 40 mm), insulation tape, insulated
gloves
The ESS has been powered off. For details, see
ESS.
At least four persons are required to replace the component.
NO TE
There are multiple battery pack appearances. This section uses one type of battery pack as
an example. The actual product may vary.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Replacing a Battery Management Module
2.2 Powering Off a Single
Module
78