Showsesmac - Huawei OceanStor S2600 Command Reference Manual

4 System Management Commands
Function
The command synchronize is used to synchronize the system software.
Format
synchronize
Parameters
None.
Modes
Normal mode, safe mode, and upgrade mode.
Level
Super administrator level and administrator level.
Usage Guidelines
The command synchronize is used to synchronize the system software. When the system in
dual-controller mode, you should run the command upgradesys to upgrade the system software
on the secondary controller first. After upgraded, the secondary controller is automatically reset.
Then run the command synchronize on the primary controller to synchronize the latest version
to it.
Example
Synchronize the system software.
OceanStor: admin> synchronize

4.6.3 showsesmac

Function
The command showsesmac is used to query the SES version's MAC address about the controllers
or the expander modules.
Format
showsesmac
Parameters
None.
Modes
Normal mode.
4-26 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor S2600 Storage System
Command Reference
Issue 07 (2010-05-20)