Huawei OceanStor S2600 Command Reference Manual page 238

9 Value-Added Service Management Commands
Format
chgtgt -c controller ID -ti target ID [-p port ID][-ip IP address] [-port TCP/IP port] [-m
recovery mode] [-chap yes or no] [-user user -pwd password]
Parameters
Keyword and Value Description
-c controller ID
-ti target ID
-p port ID
-ip IP address
-port TCP/IP port
-m recovery mode
-chap yes or no
-user user
-pwd password
Modes
Normal mode.
Level
Super administrator level and administrator level.
9-54
The controller ID. The value is A or B, and are case
insensitive.
The target ID. The value ranges from 0 to 7.
The ID of the iSCSI port . The value can be 0, 1, 2,
or 3.
The IP address of the iSCSI target. The format is
xx.xx.xx.xx.
The TCP/IP port ID of the iSCSI target. The value
ranges from 0 to 65535.
The link recovery policy. The value can be 1 or 2.
The value 1 stands for the auto mode.
l
The value 2 stands for the manual mode.
l
The parameter decides whether to enable the CHAP
authentication. The value can be 0 or 1.
The value 0 stands for no. The CHAP
l
authentication is disabled.
The value 1 stands for yes. The CHAP
l
authentication is enabled.
The CHAP user name.
The CHAP password.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor S2600 Storage System
Command Reference
Default Value
None.
None.
None.
None.
None.
None.
None.
None.
None.
Issue 07 (2010-05-20)